Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Terratek® BD 4015 - PSAC... - Green Dot Holdings LLC

Material Data Center offers the following functions for Terratek® BD 4015:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Terratek BD datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
Other Standards[S]
Melt Flow Index, MFI 8.8 g/10min
Temperature 190 °C
Load 2.06 kg
S: These properties are reported by the producer according standards that are different to our defaults.
Mechanical propertiesValueUnitTest Standard
Other Standards[S]
Tensile Strength at Yield 18.6 MPa
Izod Impact notched, 1/8 in 49.6 J/m
S: These properties are reported by the producer according standards that are different to our defaults.
Other propertiesValueUnitTest Standard
Other Standards[S]
Density 1300 kg/m³
Moisture Content 1 %
Bulk Density 833 kg/m³
S: These properties are reported by the producer according standards that are different to our defaults.
Processing Recommendation Injection MoldingValueUnitTest Standard
Pre-drying - Temperature 93.3 °C -
Pre-drying - Time 2 - 4 h -
Melt temperature ≤204 °C -
Mold temperature 15.6 - 48.9 °C -
Zone 1 166 - 177 °C -
Zone 2 171 - 182 °C -
Zone 3 171 - 182 °C -
Nozzle temperature 171 - 182 °C -
Characteristics
Processing
Injection Molding
Certifications
Contains renewable resources, Biodegradable
Regional Availability
North America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.